Thread: Semi Auto Install Script For Ubuntu 10.04 + rtorrent + rutorrent 3.1

These Script's Has Been Written By iDarkside For A Ubuntu 10.04 32-bit Server To Install rtorrent With rutorrent interface

Features:-
rTorrent Running in Screen (Latest)
rTorrent Autostart On Reboot
ruTorrent Webui 3.1 (Latest)
All ruTorrent Plugins
Removed Darkpal Theme
Added Oblivion Theme
Added New Favicon

Steps:-

Step 1 - login to your server via ssh

Setp 2 - wget http://idarkside.co.uk/rut/script1.sh

step 3 - chmod 777 step1.sh

Step 4 - sudo ./step1.sh

Step 5 - cd ~

Step 6 - nano .rtorrent.rc

Step 7 – copy following text in to the document


Code:

Code:

#This s is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.

# Global
max_downloads_global = 10
max_uploads_global = 100

# Maximum and minimum number of peers to connect to per torrent.
min_peers = 20
max_peers = 200

# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 20
max_peers_seed = 250

# Maximum number of simultanious uploads per torrent.
max_uploads = 20

# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0

# Default directory to save the downloaded torrents.
directory = ~/rtorrent/downloads

# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = ~/rtorrent/.session

# Watch a directory for new torrents, and stop those that have been
# deleted.
schedule = watch_directory,5,5,load_start=~/rtorrent/torrents/*.torrent
#schedule = untied_directory,5,5,stop_untied=

# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=500M

# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000

# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no

# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no

# Port range to use for listening.
port_range = 64300-64500

scgi_port = 127.0.0.1:5000

# Start opening ports at a random position within the port range.
port_random = yes

# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = no

# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = no

# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa

# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,enable_retry,prefer_plaintext
# encryption = allow_incoming,try_outgoing

#
# Do not modify the following parameters unless you know what you're doing.
#

# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
hash_read_ahead = 10

# Interval between attempts to check the hash, in milliseconds.
hash_interval = 10

# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
hash_max_tries = 5

# Max number of files to keep open simultaniously.
max_open_files = 256

# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>

max_open_http = 24

# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"

# Remove a scheduled event.
#schedule_remove = "ip_tick1"

dht = disable

peer_exchange = no

preload_type = 1

max_memory_usage = 1024M

Step 8 – Once Copied Press Ctrl + X

Step 9 – When It Asks To Save File Press “Y”

Step 10 – and make sure the file name is “.rtorrent.rc” make sure the “.” Is at the start

Step 11 – screen –S rt rtorrent

Step 12 – Press Ctrl + a + d (To View That Screen Again "screen -x rt)

Step 13 - wget http://idarkside.co.uk/rut/script2.sh

Step 14 – chmod 777 step2.sh

Step 15 – sudo ./step2.sh

Step 16 – cd /etc/apache2/sites-avalible

Step 17 – In the 'default' file, scroll all the way down to the end and look for the second to last line '</Directory>'. Now add this 'code' directly under the '</Directory>' line :


Code:

Code:

<Location /rutorrent>
  AuthType Digest
  AuthName "Authorized"
  AuthDigestDomain /var/www/rutorrent/ http://YOUR-SERVER-IP/rutorrent
 
  AuthDigestProvider file
  AuthUserFile /etc/apache2/.passwds
  Require valid-user
  SetEnv R_ENV "/var/www/rutorrent"
</Location>

NOTE: CHANGE YOUR-SERVER-IP With your actual server IP

Step 18 – nano default-ssl

Step 19 – In the 'default-ssl' file, scroll all the way down to the end and look for the second to last line '</Directory>'. Now add this 'code' directly under the '</Directory>' line Once Again:

Code:

Code:

<Location /rutorrent>
  AuthType Digest
  AuthName "Authorized"
  AuthDigestDomain /var/www/rutorrent/ http://YOUR-SERVER-IP/rutorrent
 
  AuthDigestProvider file
  AuthUserFile /etc/apache2/.passwds
  Require valid-user
  SetEnv R_ENV "/var/www/rutorrent"
</Location>

NOTE: CHANGE YOUR-SERVER-IP With your actual server IP

Step 20 – wget http:// http://idarkside.co.uk/rut/script3.sh

Step 21 – chmod 777 script3.sh

Step 22 – nano script3.sh – (OPTIONAL Steps 22 – 26 These Steps Are only To allow Change Of Default username “rtorr”

Step 23 – change End of Line 20 and edit username from “rtorr” to your desired username

Step 24 – Ctrl + X

Step 25 - Press “y”

Step 26 – Ensure File Name Is script3.sh

Step 27 – sudo ./script3.sh

Step 28 – Enter Password and Confirm When Asked then Wait For Script To Finish

Step 29 – cd /var/www/rutorrent/conf

Step 30 – nano config.php

Step 31 – Scroll To Line 28 - $XMLRPCMountPoint = “/RPC2”

Step 32 – Change “/RPC2” To “/var/www/rutorrent/plugins/rpc”



Step 33 – go To Either:-
http://your-server-ip/rutorrent
https://your-server-ip/rutorrent

Thanks For Using My Install Scrips

Your links are dead! I'd love to try your script. Do you have a new link?

Thanks

does anyone have something similar on a script to install rutorrent to split a 16g? so me and a friend can split 1TB a piece and have 8GB ram
prefer Debian 6 squezze script if possible but would really like the best/easiest script to install and setup semi dedicated server on a kimi
thanks for any help please.

if Ubuntu script is all there is that is fine to

Originally Posted by pgmoney

does anyone have something similar on a script to install rutorrent to split a 16g? so me and a friend can split 1TB a piece and have 8GB ram
prefer Debian 6 squezze script if possible but would really like the best/easiest script to install and setup semi dedicated server on a kimi
thanks for any help please.

if Ubuntu script is all there is that is fine to

Unfortunately there is no split script available. You will need to do it manually. What you could do for instance is create a virtual quota. That is by creating a file with the allocated filesize, and then mounting it as a mount point. The disadvantage of this might be slower IO. But this guarantees that rTorrent would at least not lock up.

There is actually a paid plugin for rTorrent for this (which I would like to obtain too). I'm not the coder, or seller, but if you are interested for further information, please PM me.