Thread: What does CAM/TS/TC/SCREENER/R5 etc Mean?

CAM -
A cam is a theater rip usually done with a digital video camera. A mini tripod is sometimes used, but a lot of the time this wont be possible, so the camera make shake. Also seating placement isn't always idle, and it might be filmed from an angle. If cropped properly, this is hard to tell unless there's text on the screen, but a lot of times these are left with triangular borders on the top and bottom of the screen. Sound is taken from the on board microphone of the camera, and especially in comedies, laughter can often be heard during the film. Due to these factors picture and sound quality are usually quite poor, but sometimes we're lucky, and the theater will be' fairly empty and a fairly clear signal will be heard.
TELESYNC (TS) -
A telesync is the same spec as a CAM except it uses an external audio source (most likely an audio jack in the chair for hard of hearing people). A direct audio source does not ensure a good quality audio source, as a lot of background noise can interfere. A lot of the times a telesync is filmed in an empty cinema or from the projection booth with a professional camera, giving a better picture quality. Quality ranges drastically, check the sample before downloading the full release. A high percentage of Telesyncs are CAMs that have been mislabeled.
TELECINE (TC) -
A telecine machine copies the film digitally from the reels. Sound and picture should be very good, but due to the equipment involved and cost telecines are fairly uncommon. Generally the film will be in correct aspect ratio, although 4:3 telecines have existed. A great example is the JURASSIC PARK 3 TC done last year. TC should not be confused with TimeCode , which is a visible counter on screen throughout the film.
SCREENER (SCR) -
A pre VHS tape, sent to rental stores, and various other places for promotional use. A screener is supplied on a VHS tape, and is usually in a 4:3 (full screen) a/r, although letterboxed screeners are sometimes found. The main draw back is a "ticker" (a message that scrolls past at the bottom of the screen, with the copyright and anti-copy telephone number). Also, if the tape contains any serial numbers, or any other markings that could lead to the source of the tape, these will have to be blocked, usually with a black mark over the section. This is sometimes only for a few seconds, but unfortunately on some copies this will last for the entire film, and some can be quite big. Depending on the equipment used, screener quality can range from excellent if done from a MASTER copy, to very poor if done on an old VHS recorder thru poor capture equipment on a copied tape. Most screeners are transferred to VCD, but a few attempts at SVCD have occurred, some looking better than others.
DVD-SCREENER (DVDscr) -
Same premise as a screener, but transferred off a DVD. Usually letterbox , but without the extras that a DVD retail would contain. The ticker is not usually in the black bars, and will disrupt the viewing. If the ripper has any skill, a DVDscr should be very good. Usually transferred to SVCD or DivX/XviD.
DVDRip -
A copy of the final released DVD. If possible this is released PRE retail (for example, Star Wars episode 2) again, should be excellent quality. DVDrips are released in SVCD and DivX/XviD.
VHSRip -
Transferred off a retail VHS, mainly skating/sports videos and XXX releases.
TVRip -
TV episode that is either from Network (capped using digital cable/satellite boxes are preferable) or PRE-AIR from satellite feeds sending the program around to networks a few days earlier (do not contain "dogs" but sometimes have flickers etc) Some programs such as WWF Raw Is War contain extra parts, and the "dark matches" and camera/commentary tests are included on the rips. PDTV is capped from a digital TV PCI card, generally giving the best results, and groups tend to release in SVCD for these. VCD/SVCD/DivX/XviD rips are all supported by the TV scene.
WORKPRINT (WP) -
A workprint is a copy of the film that has not been finished. It can be missing scenes, music, and quality can range from excellent to very poor. Some WPs are very different from the final print (Men In Black is missing all the aliens, and has actors in their places) and others can contain extra scenes (Jay and Silent Bob) . WPs can be nice additions to the collection once a good quality final has been obtained.
DivX Re-Enc -
A DivX re-enc is a film that has been taken from its original VCD source, and re-encoded into a small DivX file. Most commonly found on file sharers, these are usually labeled something like Film.Name.Group(1of2) etc. Common groups are SMR and TND. These aren't really worth downloading, unless you're that unsure about a film u only want a 200mb copy of it. Generally avoid.
Watermarks -
A lot of films come from Asian Silvers/PDVD (see below) and these are tagged by the people responsible. Usually with a letter/initials or a little logo, generally in one of the corners. Most famous are the "Z" "A" and "Globe" watermarks.
Asian Silvers / PDVD -
These are films put out by eastern bootleggers, and these are usually bought by some groups to put out as their own. Silvers are very cheap and easily available in a lot of countries, and its easy to put out a release, which is why there are so many in the scene at the moment, mainly from smaller groups who don't last more than a few releases. PDVDs are the same thing pressed onto a DVD. They have removable subtitles, and the quality is usually better than the silvers. These are ripped like a normal DVD, but usually released as VCD.

CONTINUED NEXT POST>>>>>>>>>>>>

Scene Tags...
PROPER -
Due to scene rules, whoever releases the first Telesync has won that race (for example). But if the quality of that release is fairly poor, if another group has another telesync (or the same source in higher quality) then the tag PROPER is added to the folder to avoid being duped. PROPER is the most subjective tag in the scene, and a lot of people will generally argue whether the PROPER is better than the original release. A lot of groups release PROPERS just out of desperation due to losing the race. A reason for the PROPER should always be included in the NFO.
LIMITED -
A limited movie means it has had a limited theater run, generally opening in less than 250 theaters, generally smaller films (such as art house films) are released as limited.
INTERNAL -
An internal release is done for several reasons. Classic DVD groups do a lot of INTERNAL releases, as they wont be dupe'd on it. Also lower quality theater rips are done INTERNAL so not to lower the reputation of the group, or due to the amount of rips done already. An INTERNAL release is available as normal on the groups affiliate sites, but they can't be traded to other sites without request from the site ops. Some INTERNAL releases still trickle down to IRC/Newsgroups, it usually depends on the title and the popularity. Earlier in the year people referred to Centropy going "internal". This meant the group were only releasing the movies to their members and site ops. This is in a different context to the usual definition.
STV -
Straight To Video. Was never released in theaters, and therefore a lot of sites do not allow these.
R5 (bootleg)-
R5 refers to a specific format of DVD released in DVD Region 5, the former Soviet Union, and bootlegged copies of these releases that are distributed on the Internet. In an effort to compete with movie piracy, the movie industry chose to create a new format for DVD releases that could be produced more quickly and less expensively than traditional DVD releases. R5 releases differ from normal releases in that they are usually a direct Telecine transfer of the film without any of the image processing common on DVD releases, and without any special features. This allows the film to be released for sale at the same time that DVD Screeners are released. Since DVD Screeners are the chief source of high-quality pre-DVD release pirated movies, this allows the movie studios to beat the pirates to market. In some cases, R5 DVDs may be released without an English audio track, requiring pirates to use the direct line audio from the film's theatrical release. In this case, the pirated release should be tagged with ".LINE" to distinguish it from a release with a DVD audio track.

ASPECT RATIO TAGS -
These are *WS* for widescreen (letterbox) and *FS* for Fullscreen.
REPACK -
If a group releases a bad rip, they will release a Repack which will fix the problems.
NUKED -
A film can be nuked for various reasons. Individual sites will nuke for breaking their rules (such as "No Telesyncs") but if the film has something extremely wrong with it (no soundtrack for 20mins, CD2 is incorrect film/game etc) then a global nuke will occur, and people trading it across sites will lose their credits. Nuked films can still reach other sources such as p2p/usenet, but its a good idea to check why it was nuked first in case. If a group realise there is something wrong, they can request a nuke.
NUKE REASONS...
this is a list of common reasons a film can be nuked for (generally DVDRip)
BAD A/R = bad aspect ratio, ie people appear too fat/thin
BAD IVTC = bad inverse telecine. process of converting framerates was incorrect.
INTERLACED = black lines on movement as the field order is incorrect.
DUPE -
Dupe is quite simply, if something exists already, then theres no reason for it to exist again without proper reason.
Thanks goes out to Pam for pointing out this site that helps describe all the various formats you may come across, as well as thanks to BitHQ :: Video Formats BitHQ.org

If you have some other formats you think would be good to add, please do so, thanks redrain and pam from TTF
ALso a shout out to zombie_shark

my post in a new thread. :>

Well whoever made it...appreciate the post. Very helpful :)

Originally Posted by zombie_shark

my post in a new thread. :>

sorry about that zombie_shark, I just found your tutorial I will give you your dew; again sorry about that

Standard Standards
• H.261
is not a term you have to worry about, but it's the technology that most video standards and codecs were originally based on. Originating in 1990, it's the first major digital video compression standard, and like other "H" standards, it was developed by the International Telecommunication Union. This one was primarily for teleconferencing over ISDN lines, and as such, it looks like ass.
• MPEG-1
Part 2 is another oldie, developed by the Movie Picture Experts Group and approved in 1991. (BTW, the whole "part" thing is because video is just one "part" of each MPEG standard.) Based quite a bit on H.261, MPEG-1 was designed to take VHS quality video and squeeze it down to a bit rate of about 1.5Mbps, optimized for CD transfers. No surprise, it's the standard used for all VCDs (which can play in most DVD players), but not a standard you would see hanging around today.
• With MPEG-2
Part 2, approved in 1994, we're finally talking decent vid. Also known as H.262, since it was developed jointly by the ITU-T and ISO, MPEG-2 is an extension of MPEG-1 that delivers better resolution and higher bit rates (3-15Mbps for standard def and 15-30Mbps for HD, though the spec allows for up to 100Mbps). It's the video codec used by DVD and digital television, though now it's slowly being replaced by the more efficient MPEG-4, except on DVDs, where it'll ride out that disc format's lifetime.
• H.263 is designed for sending video over crappy connections. So it's used to encode most Flash video and to send video over mobile networks.
• MPEG-4 is where we really stand right now. It has a much broader scope than past MPEG standards, aiming to tackle both the low end (crappy cellphones on a crappy network) and the high end (Blu-ray). It's still developing, so it's not-so-coincidentally where this whole story gets messier. There are two relevant parts of the MPEG-4 standard for our myopic video purposes: There's Part 2. And there's Part 10—which is also known as H.264 or Advanced Video Coding (AVC). To be clear though, even though they're both part of the MPEG-4 standard, they're totally different formats. Nevertheless, both are more efficient at compression than past MPEG codecs, delivering better quality using less space.
• Okay, so if you've ever frequented a Torrent site, you've actually watched tons of videos that use MPEG-4 Part 2, though it's not like they would've had a flashing sign telling you so. MPEG-4 Part 2 actually has different "profiles"—the two that matter being Simple Profile, for low bitrate, low-res stuff, and Advanced Simple Profile. The latter profile is what's used by movies you would download in formats like DivX or XviD or 3ivx—which are all codecs that are essentially just differing implementations of the MPEG-4 Part 2 standard.
• MPEG-4 Part 10, the other part, was actually co-devopled by MPEG and the ITU-T, so it's also known—in fact, more commonly known—as H.264. It's more efficient than MPEG-2 and MPEG-4 Part 2, delivering the same quality video in as little as half the space, making it suitable for the low and high-end. Because of this, it's quickly becoming the standardest standard. It's part of the HD DVD and Blu-ray spec, replacing MPEG-2 in digital TV (like with satellite services and AT&T's U-Verse IPTV) and supported by pretty much every portable video player on the planet from the iPod to the PSP. Apple has a decent, if Kool-Aid flavored, FAQ about H.264.
• VC-1 is essentially a Microsoft developed alternative video codec to H.264 released as a standard by the Society of Motion Picture and Television Engineers, though it descends from the same H.26X/MPEG family. (It essentially started life as WMV9, but then Microsoft shopped it to the SMPTE to make it an industry standard, and now it is.) It too, is part of the mandatory Blu-ray and HD DVD spec, and is the official video codec of the Xbox 360. It's pitch is the same as H.264's—trying to deliver better quality using less space, like HD video in 6-8Mbps.

Free-Floating Codecs
Okay, so all that stuff up there are industry-wide standard video codecs. On top of all of those, various entities love putting out their own spin on those standards. As we mentioned before, DivX (proprietary) and XviD (open source), for instance, use MPEG-4 Part 2 (more specifically, MPEG-4 ASP) compression, meaning stuff that'll natively play back MPEG-4 ASP will also play back DivX. Like the Xbox 360, for instance. There are a ton of MPEG-4 ASP-based codecs, actually, like FFmpeg, 3ivx and others, but DivX and XviD are the most common. Same deal with H.264: Some well known codecs that use it are Apple's Quicktime H.264, x264 and Nero Digital. You've also got Windows Media Video (WMV) codecs, which are Microsoft's proprietary twists on industry standards.
Containers aka Wrappers
Alright, well you've probably noticed that none of your video files have the extension .h264 or .vc1 or the like. That's because videos are packaged in containers or wrappers that stuff things like the audio, navigational info, etc. along with the video in a single pretty file. Naturally, there are about as many of them as there are codecs. To be clear, you would take a video encoded with, say, H.264, and wrap it up as a .mp4 or .avi file.

The majors ones are:
• AVI (Audio Video Interleave) is Windows' standard multimedia container
• MPEG-4 Part 14 (known to you as .mp4) is the standardized container for MPEG-4
• FLV (Flash Video) is the format used to deliver MPEG video through Flash Player
• MOV is Apple's QuickTime container format
• OGG, OGM and OGV are open-standard containers
• MKV (Mastroska) is another open-specification container that you've seen if you've ever downloaded anime
• VOB means DVD Video Object. Guess what? It's DVD's standard container, and what you get when you rip a DVD.
• ASF is a Microsoft format designed for WMV and WMA—files can end in .wmv or .asf
Thanks to Gizmodo

Can you change the Bright blue to a white!

It really hurts the eyes to read!

Thanks!

changed the font color to white per your request freddy

Thanks!

Nice post! Repped!