Thread: Xbox 360: How to Crossflash! (iXtreme Burner Max)

HOW TO CROSSFLASH YOUR BURNER TO INSTALL IXTREME BURNER MAX - XBOX360


Confirmed crossflashable models:

LiteOn
iHAS124B
iHAS224B
iHAS324B
iHAS424B
iHAS524B
iHAS624B
iHAS122-04



Asus
DRW-24B3LT [i have one of these, if you need support about it, please PM me]
DRW-24B3ST
DRW-24B1LT
DRW-24B1ST

HEWLETT PACKARD (HP)
DVD 1270i B
DVD 1260i B

PLEXTOR
PL-L890SA

To the procedure it will be necessary firmwares from codeguys (LINK) and some codeguys Utilites (LINK) too. Search for the firmware according to your driver's firmware. (you can use a 524 firmware at a 124 burner if you flash it like this. Obviously the "hardware needed" such as lightscribe and LabelTag features will not be available in less-capable-flashed burners.


Prepare yourself!:
Open EEPROM.exe and make a backup of it in BACKUP EEPROM, save it and STORE IT SAFELY! if some shit happens, you'll be safe. Believe me, i already lost a 524 because i lost this.

05.png

Be careful with the burner selected in the superior blank!

Open Flash_Utility and make a firmware backup too. Click on "Read Flash" and SAVE IT SAFELY TOO!

06.png

Crossflashing your burner

Now let's start the process. Be careful, any wrong step may brick your burner. That's why we save the firmwares.

Download the firmware that you want your burner to become. (Remember that the "hardware needed" such as lightscribe and LabelTag features will not be available in less-capable-flashed burners.)

948firmwares.png

Open Flash_Utility.exe again, but now click "Write Flash", click Yes for the warnings and search the downloaded and unzipped firmware downloaded from codeguys

Click YES and wait until it finishes. Your burner's led will start to blink.
Turn off your PC. Don't just restart, turn it off and wait a little bit.
Turn on your PC again and open EEPROM.exe (always being sure that you're selecting the right burner)
Go to CROSSFLASH and click CONVERT DRIVE, click Yes and wait until the end. Now turn off / restart and you're ready to go!

08.png

Any comments or doubts can be posted here or sent by PM! I will be glad to help you :D

hey when i select write flash and i selected the ihas524b to flash it to my asus drw-24b1st it load 2 bars and gives me a flash failed ive tried loading different ihas versions but its still the same thing have you came across the same problem

that is a true i also agree with this ...


Cyber Crime
Internet Fraud