Thread: Need Urgent Help!

Getting this error when i connect a particular HDD, however the HDD works fine when i connect it to a different computer

SSDT 0xcf612898 0x6f4 0xcf6120d0 0xa000 0x4
SLIC entry found 0xcf6120d0 index 0x6
SLIC loaded into existing entry 0xcf6120d0
recalculating checksums rsdt len 0x40 xsdt len 0x5c
Completed
Booting Windows 7/Vista/Server (No SLIC - Pointers)
Booting Windows 7/Vista/Server (No SLIC)
Booting Windows NT/2000/XP
Booting Enter Command Line
Boot Failed! Press any key to enter command line.

did a bios update...well its not working. Searched for this error, found no solution...
anyone has any ideas ? Will need a noobs guide for this ..if anyone got any



Thanks

You didn't provide nearly enough information to do more than guess at what is really going on e.g. what hard drive, interface, driver, OS/version, did this drive ever work on this computer and if so, what has changed since then, etc. It's considered poor form to use urgent labels or post the same thing in multiple venues though.

At a guess you don't have the correct SATA driver installed. You didn't give a context, so it may be that the driver is corrupt or that it was never in place for this computer. It'd also be a great time to run the manufacturer's drive diagnostic to discern if drive health is a factor here.

Maybe you put the disk into the wrong SATA interfaces, I did it once ..try change to another?

Enter the command prompt and type "chkdsk /f" if that doesn't work, then you need to make sure the HDD is set to be read first in the BIOS.

check it on a third computer it might be encrypted and require the same tpm ship..