Thread: Gaming PC

So my custom built kick ass computer I put together 4 years ago isnt what it quite used to be :(.



Is spending $400 to $600 going to give me a machine that can play the top hits of 2009 (it has been a WHILE since I have purchased any video games too). Or should I custom build me another machine?

If you were going to spend around that, or even up to $800/$900 on a gaming system what would you buy?

You definitely should build a custom PC. With $600 you'll be able to get a PC that can play most if not all games. Maybe not on the highest settings, but definitely decent settings.

I built a computer 2 years ago for $800 and I can max out every game today except Crysis and Metro 2033.

i am agree with kurumbler .........
i built my pc 1year ago i can play every game

Definitely go for the new custom build. A year ago, I built my current system for just shy of $900 (Newegg).
SPECS:
MoBo: DFI LanParty JR 790GX-M3H5
CPU: AMD Phenom II x4 955 BE
RAM: 4GB G.SKill DDR3 PC3-12800 (1600MHz)
PSU: Corsair TX850W (850W Single-Rail +3.3V@30A, +5V30A, +12V@70A, -12V@0.8A, +5VSB@3A)
GPU: Sapphire HD5770 1GB & XFX HD5770 1GB (X-fire)
HDD: WD 320GB Caviar Blue 7200RPM 16MB cache
Case: Antec Mini-P180 Black

My rig can handle Crysis at Very High at 1680x1050 avg. 32FPS (without modded maps or textures).
I'm sure that if you wanted to you could get something very comparable to my build with the price range that you want. The one thing that I cannot stress hard enough; however, get a PSU that is a Single-Rail design with a high amperage output. As well, DON'T GO CHEAP ON A PSU. I have seen a few cheap-o PSUs blow and take whole systems with them.
Now, with the whole single vs. multi-rail design statement, I am not trying to start a flamewar or fanboy war. I'm making that statement because there are a lot of PSUs that are using incorrect specs for multi-rail design. If you do go multi-rail, make sure that it is a SLi Certified PSU with an 80% efficiency rating or higher. The big discouragement for multi-rail designs is the insufficient amperage delegation per rail (in some multi-rail PSUs). Multi-rail designs do work fine in most cases. However, I have seen many odd system issues resulting from insufficient amperage to system components (random BSoDs, video tearing, sound stuttering, screen artifacts, etc.).

^ lol overkill PSU :p 650W should have been more then enough, especially since you only have 1 hard disk.

I've been a fan of Maximumpc for quite a few years now. After reading the opening it reminded me of an article that was done towards the end of last year that the author of this thread may want to look at.

How to Build an Awesome Gaming PC for $647 | Maximum PC

Now almost a year later these parts are most likely cheaper. I would tweak these parts a bit though if you have the budget. Not sure if this will be of extreme help or not but I believe it should be viewed.

It's somewhat similar to DethRide69's build not exact mind you but nonetheless either choice would be good in my opinion.

Also don't be afraid to buy a larger watt PSU as this may be beneficial later on if you chose to upgrade a bit on this build be it a SLI or Crossfire addition or adding in better air cooling or HDDs.

I myself use the same PSU as DethRide69 and I love it to be honest. However it can be a bit much to a point I would suppose.

Originally Posted by Enigma78

I've been a fan of Maximumpc for quite a few years now. After reading the opening it reminded me of an article that was done towards the end of last year that the author of this thread may want to look at.

How to Build an Awesome Gaming PC for $647 | Maximum PC

Now almost a year later these parts are most likely cheaper. I would tweak these parts a bit though if you have the budget. Not sure if this will be of extreme help or not but I believe it should be viewed.

It's somewhat similar to DethRide69's build not exact mind you but nonetheless either choice would be good in my opinion.

Also don't be afraid to buy a larger watt PSU as this may be beneficial later on if you chose to upgrade a bit on this build be it a SLI or Crossfire addition or adding in better air cooling or HDDs.

I myself use the same PSU as DethRide69 and I love it to be honest. However it can be a bit much to a point I would suppose.

The expandability is the exact reason that I opted for such a high powered PSU.
SirAli, you are definitely correct with your statement, though. In my situation, the single HDD and low(er) power consuming Juniper GPU cores definitely help to bring the PSU requirement down. A 600-650W PSU with a 52A +12V rail(s) would have probably been enough. However, if I ever decide to add a few more drives or other "accessories" it would definitely be nice to know that I don't have to worry about the PSU. :)

well in present time most people r building things like this

For budget sensitive people

Asus P7H55
i3 540
2x2GB Gskills 1600mhz ripjaws
Evga 460GTX SC 1GB 256Bits
HX620 Modular PSU
Silverstone TJ or Corsair 600T


i am using this setup right now which is more than enough for current games just need to change the gpu!

i7 920 DO
Asus P6T
Chaintech ApoogEE GT Blazer 2400mhz Rams
EVGA 260GTX FTW
Corsair TX750W
CM690
2x640GB WD BLue Caviar
Viewsonic VX 2433


and i agree to DethRide69 ... a bigher strong solid and reliable PSU is very imp ...
from two basic point of views
u dnt have to change psu every time u upgrade
u leave a margin of expandability ... like duall or tripple gpu setup fancontrollers ccfls lots of fans bla bla bla ...
so extra juice is always helpful!

Originally Posted by SirAli

^ lol overkill PSU :p 650W should have been more then enough, especially since you only have 1 hard disk.

Huh? I don't get why the disk drive is significant for you, even a VelociRaptor only uses 6-7 Watts.